Fusion splice protection sleeves high quality - single core, 2.7mm after shrink.
The sleeves are constructed with a stainless steel strength member, polyolefin copolymer inner tube and a polyolefin outer tube. Lengths are precise and all ends are free from burrs and sharp edges. The entire assembly is heat-bonded, keeping the tubes in line with the strength member during shipping, handling and shrinking.
Lengths: 40, 50 and 60mm
Reinforced Material: Stinless Steel Rod 1.2mm
Inner Tube(EVA): 1.2mm
Shrinkage O.D.: 2.7mm
Shrinking Temperature: 120C to 145C
Low Temperature Property: No Cracks at -55C lasting 4 hours
Normal Operation Temperature: -40C to +65C
Radial Shrinking Rate: >50%
Axial Shrinking Rate: <3%
Tensile Strength: 18Mpa
40mm and 50mm - sold in pack of 24
60mm - sold in pack of 12