Fusion splice protection sleeves high quality - single core, 1.35mm after shrink.
The sleeves are constructed with a stainless steel strength member, polyolefin copolymer inner tube and a polyolefin outer tube. Lengths are precise and all ends are free from burrs and sharp edges. The entire assembly is heat-bonded, keeping the tubes in line with the strength member during shipping, handling and shrinking.
Reinforced Material: Stinless Steel Rod 0.6mm
Inner Tube(EVA)I: 0.45mm
O.D Before Shrinking: 1.8mm
O.D. After Shrinking: 1.35mm
Shrinking Temperature: 110C to 140C
Low Temperature Property: No Cracks at -55C lasting 4 hours
Normal Operation Temperature: -40C to +65C
Radial Shrinking Rate: >50%
Axial Shrinking Rate: <3%
Tensile Strength: 20Mpa