FC, SC, ST In-Adapter Ferrule Cleaner - Pen Huxcleaner.
500 Swabs = 1 Pen Cleaner
In Fiber Optic Communication, the ferrule is used as a final interconnect part which transfers light signal through the optical fiber. The ferrule cleaning is the most important final process in the interconnect to prevent signal error especially the back reflection specification.
How To Clean:
Insert Cleaning Ferrule inside adaptor:
HUXCleaner was precisely designed for the depth of SC, FC and ST type adapters.
Apply approx. 500g pressure and rotate the Body:
When the above pressure is applied, rotate the Body around 2-3 rotations.
Before removing the HUXCleaner from the adaptor turn the Rotator halfway clockwise.
Remove and Cap:
If not in use, do not remove the Cap to prevent any contamination.
Do not turn counterclockwise:
The Rotator must be turned clockwise only prior removal of the HUXCleaner from an Adapter.
Do not rotate more than 90 degrees angle:
The Rotator must be turned at 45-90 degrees clockwise. If over, it may not guarantee for typical cleaning times.
The cleaning performance may be effected by contamination and environmental factors.
This unit is disposable so please dispose the unit as an industrial waste when you feel the Rotator does not turn smoothly